Light Weight Rack Mount Fiber Patch Panel Equipped With Optical Cable Fixing Device

HT-1124ST-A Rack Fiber Optic Patch Panel

Product Description

Fiber optic patch panel is a panel box that protects the fusion of fiber optic cables and fiber optic pigtail in optical cable laying terminal. It is mainly used for the direct and branch connection of indoor optical cable and the fixing of optical cable terminal, playing the role of pigtail storage and joints protection.

Product Features

1. Light weight, high strength, applying epoxy electrostatic spraying technology, elegant appearance, easy to use.
2. The fusion splice protector adopts superposition structure, with flexible configuration, can be removed to the workbench for fusing, easy operation and maintenance.
3. Equipped with optical cable fixing device, fusion splice protector, cable clamp and reliable grounding device. It has the function of fixing and fusing optical cables and is used to realize the connection between pigtail fibers and optical cables.

Product Structure

The fiber optic patch panel is composed of three parts: outer shell, internal components and optical fiber connector protector.

Product Specifications

PS: The fiber optic patch panel is not suitable for outdoor use. If it is to be used, protective measures should be taken. Special specifications can be customized according to customer requirements.

Product Functions

The function of the fiber optic patch panel is to connect two pieces of optical cable. The fiber optic patch panel is where the end of the optical cable is connected, and then the optical switch is connected through the optical skip cable. Therefore, fiber optic patch panels are usually mounted on a 19-inch so that they can accommodate a larger number of cable terminals. The function of the connector box is to connect two segments of optical cable. fiber optic patch panel is to connect and protect fiber optic cable and fiber optical pigtails. In practical work, fiber optic patch panel can be used as indoor connector boxes. But seldom are connector boxes used as fiber optic patch panels for their usage differs.

Working Condition

Operating Instruction

1. Pull down the clasp and open the top cover;
2. Reserve the cable to be fused, fix the steel wire in the cable on the front bracket, and then fix the cable at the entrance of the cable.
3. Peel off the reserved optical cables and fuse with pigtail by a fibre-optic heat-shrinkable tube and fix them in fusion splice protector.
4. Pull down the clasp once more and cover it up.

Installation Requirements

1. The installation location, installation mode and height of information module, multi-user optical cable terminal box and assembly point wiring module should meet the design requirements.
2. When installed in the movable floor or on the ground, the termination box should be fixed. The Information panel is installed either vertical or horizontal. The lid of terminal box is openable, and is supposed to be waterproof, dust-proof, anti - pressure and parallel to the ground.
3. When both information module and power socket are installed in the bottom of fiber optic termination box, the spacing and protective measures should meet the design requirements.
4. The fixing method of the base of fiber optic termination box should be determined according to the specific conditions of field construction. It can be installed by anchors and fasteners. And the fixing method of the open bottom box of the information module depends on the conditions of the construction site.
5. The top cover should be firmly covered without loosening, so are the base, information module and panel. The panel should be kept on a horizontal surface for an elegant and neat appearance.
6. The wall-mounted fiber optic termination box should be located about 300mm above the ground, especially when free access floor is used in your room.
7. All kinds of socket panels should be marked with color, graphics and text to indicate the type of terminal equipment business connected.
8. Installation boxes of fiber optic connectors and adapters for end-to-end optical cables in the working area shall have sufficient space and shall meet the design requirements.

Technical Parameters

rack mount fiber patch panel

fiber patch panel enclosure

Light Weight Rack Mount Fiber Patch Panel Equipped With Optical Cable Fixing Device Images